Measurable Media
Gas
Compressed Air
Superheated Steam
Saturated Steam
Heat Transfer Oil
High Temperature Liquids
Nitrogen
Hydrogen
Oxygen
Water
Applicable Industries
Product Description
The vortex flowmeter is designed based on the Karman vortex principle, which can measure the flow, temperature, pressure and other parameters of the medium fluid of industrial pipelines according to different types, and has the functions of pulse frequency output, 4-20mA analog signal output, RS485 communication, Hart protocol and so on. It is widely used in heating, gas supply, textile, steel, medicine and other industries to measure and control gas, compressed air, steam, nitrogen, heat transfer oil and other media.
| It is known as Tongjing |
15/20/25/32/40/50/65/80 /100/125/150/200/250/300 (300-1000) plug-in |
| Nominal pressure |
DN15-DN2004.0 (> 4.0), DN250-DN3001.6 (>1.6) |
| Medium temperature °C |
-40~150,-40~250,-40~350; |
| Accuracy |
±1%R,±1.5%R; Plug-in: ± 2.5%R |
| Range |
1:6~1:30 |
| Supply voltage |
Sensor: DC12V, DC24V; Transmitter: DC24V; Battery-powered type: 3.6V battery |
| Output signal |
Square wave pulse (excluding battery-powered type): high ≥ 5V, low ≤ 1V; Current: 4~20mA |
| Pressure loss coefficient |
Conform to JB/T9249 standard Cd≤24 |
| Explosion-proof signs |
Intrinsically safe type: ExdIlia CT2-T5 flameproof type: Ex db IIC T6 Gb |
| Ingress protection |
Ordinary IP65 type |
| Environmental conditions |
The temperature is -20°C~55°C, the relative humidity is 5%~90%, and the atmospheric pressure is 86~106kpa |
| Applicable media |
Gases, liquids, vapors, mixed gases, flammable and explosive gases |
| Transmission distance |
Three-wire pulse output type: ≤100m, two-wire standard current output type (4~20mA)≤200m: load resistance≤750Ω; RS485/HART≤500m |
Fully Automatic Inspection And Calibration Equipment In The Factory
| No Temperature And Pressure Compensation |
Integrated Temperature And Pressure Compensation |
Product Upgrades
The square fastening screws are reinforced from the normal round to squarefastening columns which can adapt to a higher degree of on-site vibration.
| Threaded Connection |
Clamp Flange Connection |
One-piece Flange Connection |
Note: Choose Temp And Pressure Compensation For Gas Measurement
Gases are highly susceptible to pressure and temperature, which requires accurate measurements, temperature 25ºC and standard atmospheric pressure.
However, field conditions often can not be satisfied, therefore, it is necessary to involve temperature and pressure compensation.
Feedback From Customers
| Instrument Diameter(mm) |
Liquid |
Gas |
| Measuring Range (m3/h) |
Output Frequency Range (Hz) |
Measuring Range (m3/h) |
Output Frequency Range (Hz) |
| 15 |
0.3~5 |
35~450 |
4~20 |
352~1761 |
| 20 |
0.6~10 |
29~380 |
6~30 |
250~1273 |
| 25 |
1.2~16 |
25~320 |
8~50 |
160~1100 |
| 32 |
1.8~20 |
18~200 |
10~150 |
97~1180 |
| 40 |
2~40 |
10~190 |
20~200 |
130~1040 |
| 50 |
3~60 |
8~150 |
35~350 |
87~952 |
| 65 |
4~85 |
6~120 |
45~450 |
71~764 |
| 80 |
6.5~130 |
4.1~82 |
86~1100 |
54~696 |
| 100 |
15~220 |
4.7~69 |
133~1700 |
42~548 |
| 125 |
20~350 |
3.2~57 |
150~2000 |
26~346 |
| 150 |
30~450 |
2.8~43 |
347~4000 |
34~392 |
| 200 |
45~800 |
2~31 |
560~8000 |
22~315 |
| 250 |
65~1250 |
1.5~25 |
890~11000 |
18~221 |
| 300 |
95~2000 |
1.2~24 |
1360~18000 |
16~213 |
FAQ
1. Q: Where is your company located? Can I visit your factory?
A: Our company is located in Wuhu City, Anhui Province, China. We sincerely invite you to visit our factory.
2. Q: How can I get some samples?
A: Welcome to contact us by email or Alibaba to meet your requirements
3. Q: How does your factory do in terms of quality control?
A: Quality first. We always regard quality as the most important thing in the entire production process. Our factory has obtained CE certificates.
4. Q: What is your after-sales service? What about the warranty?
A: We provide 12 months warranty for our products, and we have a dedicated after-sales service team.
5. Q: Can you provide OEM or design service?
A: Yes, we design and manufacture our products by ourselves. We can OEM according to your requirements, including packaging, logo printing, etc.
6. Q: How about your delivery time? How do you ship the goods?
A: Once you receive your deposit, production will start immediately. About 5-7 working days after payment, we usually ship by DHL, UPS, FedEx or TNT, but also by air and sea. For urgent orders, please contact us to inquire about stock availability.
7. Q: How to deal with failures?
A: First of all, our products are produced under a strict quality control system, and the defective rate will be less than 0.2%. Secondly, during the warranty period, we will send a small number of new parts by new order. For defective batches of products, we will repair it and send it to you, or we can discuss solutions including re-recall according to the actual situation.
){kind=link}